Fully Custom Hard-Line Liquid Cooled Workstation

Side Panel Off

A beauty isn’t she? If you’re thinking “wait a second, I didn’t know you guys did systems like these,” you’d be right. We don’t do systems like these, but that doesn’t mean we don’t know how!

Original wall-mount workstation we built for our customer!

A long-standing local customer of ours brought in his existing wall-mounted workstation that we built a few years ago and asked us if we could transfer his core components to a case with more radiator capacity so we can make it even quieter.

The main use case was complex architectural work in front of his clients using an HTC Vive Pro VR headset. Thus, we knew that the system would go full bore for hours and good cooling and quietness was of the essence. Our customer also wanted to have some eye candy for his clients so the decision was made to go full custom hardline.

Filled with Red UV MOD WATER

We decided to use the Lian Li O11 Dynamic XL case with front-mounted EKWB distribution plate and red transparent ultra-pure ModMyMods Mod Water. We then incorporated the existing Intel i9-9900K (oveclocked to an all-core 5.0 GHz), 128 GB G.Skill DDR4 3200 memory, Intel 905P NVMe SSD, and RTX 2080 Ti (overclocked to 2025 MHz), all on top of an ASUS Z370-WS Pro Motherboard. We think it turned out spectacularly (see images below).

Close up of the CPU water block and the hard line tubing
Better angle of the tubing and fittings. Peep the graphics card block too!

Full specs:

• Intel i9-9900K CPU

• 128 GB G.Skill DDR4 3200 RAM

• GeForce RTX 2080 Ti Graphics Card with EKWB waterblock

• Intel 1TB 905P U.2 NVMe SSD

• ASUS Z370-WS Pro Motherboard

• EKWB distribution plate and red transparent ultra-pure ModMyMods Mod Water

• Lian Li O11 Dynamic XL case

Leave a Reply