Chassis Engineering Tech Specs Photos Testimonials Reviews Buy Now Configure: STEIGER DYNAMICS LEET™ Chassis Base Price: Customized Price: The STEIGER DYNAMICS Experience The STEIGER DYNAMICS Engineer Signature Plaque on each of our Living Room PCs symbolizes what we stand for: One man, one system. Meaning the engineer who manufactured your HTPC will be your dedicated contact in case you would need assistance with anything. Apart from that, we guarantee a no-compromise approach when it comes to system performance, quality, and reliability. This is made possible by strictly abiding by our SD Experience rules: Customers First: Nobody at SD receives sales commission. If you want a component that is not on our site, we will include it. The people consulting you through your configuration are the engineers who build your system. $0.00 Nothing But The Best: We pursue a no-compromise approach in all respects. We only integrate carefully selected best-in category components and brands ensuring highest performance and quality standards. $0.00 Excellence in Engineering: Each system is handcrafted with ingenious passion, uncompromising quality, and unparalleled attention to detail. Our cable management maximizes air-flow and assures immaculate looks. $0.00 Specials Find our current promotions here! $100 Promotion for Silver LEET chassis $50 Pre-Order DISCOUNT for Black LEET chassis None Chassis The LEET Chassis can hold up to E-ATX motherboards, 3 full size graphics cards with a length of up to 11" (280 mm) and height of 4.375 inch (115 mm: slot-height), three 2.5 inch drives (below the 5.25 inch optical drive) and four additional 3.5 inch drives. Due to limited space above the CPU, we recommend the use of liquid cooling solutions. The chassis accepts 1x 120 mm single radiator and 1x additional 120x240 mm dual radiator in pull, push or push/pull configurations. The display with Samsung panel is connected via internal USB 2.0 (DisplayLink chipset) and can be used as an extended screen (800x480) or with the included STEIGER DYNAMICS LEET Monitor App (recommended). The LEET Monitor App is configurable trough a tray menu and brings all vital system information to the front screen, including CPU/GPU temps, clocks and loads, ping, drive space, volume, and others. It also has a media screen showing movie and music playback status (when used with VLC player) Included with the LEET full aluminum HTPC chassis: - STEIGER DYNAMICS Box with 3M cable holders and all necessary screws to mount drives, motherboard, radiators, fans, PSU, etc. - STEIGER DYNAMICS Binder with printed manual, DVD with LEET Monitor App and manual, and a binder pocket for your component manuals. - Rear outside fan grill in chrome or black (depending on chassis color) - Brushed aluminum optical drive front plate and adhesive tape - 92 mm ultra silent HDD case fan, pre-mounted - 7" front screen with Samsung Display, pre-mounted - IR receiver, pre-mounted - STEIGER DYNAMICS Media Center Remote Control - Pair of white cotton gloves for assembly LEET™ Silver Hand-Brushed Full Aluminum Chassis with integrated 7" Samsung Front Screen Back in stock in February - limited amount, pre-order recommended! - LEET™ Black Hand-Brushed Full Aluminum Chassis with integrated 7" Samsung Front Screen Logo Choose the color of your metal alloy 3D chassis logo. Silver Chassis Logo - STEIGER DYNAMICS Golden Chassis Logo - STEIGER DYNAMICS Lid We recommend: - Chassis and Lid with Sound Dampening to increase the quietness of your system even further - Lid with Acrylic Glass Window and Ventilation for interior visibility Brushed Aluminum Lid Chassis and Brushed Aluminum Lid with AcoustiPak 3-Layer 7mm Sound Dampening Chassis and Brushed Aluminum Lid with AcoustiPak 3-Layer 13mm Sound Dampening Brushed Aluminum Lid with Acrylic Glass Window Chassis with 13mm Sound Dampening plus Brushed Aluminum Lid with Acrylic Glass Window LED Chassis Lighting Internal LED Chassis Lighting is only available if the Lid with Acrylic Glass Window is selected above. The circumferential, custom made light strips have a length of 43.3 inches (110 cm) and feature 66 high-intensity LEDs, which can easily be switched on and off with the touch of a button. UV lighting has a purple kind of color and will make interior system parts (white stickers, white circuit-boards areas, custom liquid cooling tubes, etc.) glow in the dark. The light strip is connected to the PSU with custom, single sleeved, black wires in fitting length. LEET™ Green LED Custom Chassis Lighting LEET™ Red LED Custom Chassis Lighting LEET™ Blue LED Custom Chassis Lighting LEET™ White LED Custom Chassis Lighting LEET™ UV/Purple LED Custom Chassis Lighting None Connectivity The chassis features front panel HD Audio and USB 3.0 connectors, as well as a SD card reader, all hidden behind a brushed aluminum door, seamlessly integrated into the chassis design. Front Panel with Aluminum Cover - 2x USB 3.0, SDHC-Card Reader, HD Audio In/Out $0.00 Power Supply All our Power Supply Units (PSU) operate from 110-240V and can be used worldwide. All PSUs are inaudible during idle and low system loads. PSUs with higher output capacity stay cooler, more efficient and more silent on high system loads. Gold PSUs feature a minimum efficiency of 90% and Platinum PSUs of 92%. Moreover, all PSUs below feature fully modular cables. Seasonic 650 Watt X-Series Gold with fully-modular power connectors Seasonic 860 Watt Platinum-Series with fully-modular power connectors Seasonic 1200 Watt Platinum-Series (fully-modular connectors) None Interior Cabling We recommend the LEET Custom Cabling for maximized air flow and immaculate interior looks. All custom cables are tailored to precisely fit the LEET chassis. The LEET cable management ensures that every single cable is carefully routed through the system and tucked away for improved airflow and clean looks. Important: Our Custom Power Supply Cables are only compatible with Seasonic PSUSs. If already own a Seasonic PSU, please specify the exact model in the comment section below (e.g. SS-860XP Active PFC F3). Set of 8 Shielded LEET™ Black Custom SATA3 (6 GB/s) Drive Cables [SD Recommended] $35.00 Set of LEET™ Black Custom Single Sleeved Power Supply Cables [SD Recommended] $65.00 STEIGER DYNAMICS Custom Cable Management Installation Service [SD Recommended] $49.00 Cooling The LEET Custom Liquid Cooling solution for ultimate silent operation, overclockability, and aesthetics was developed with Swiftech, leading manufacturer for advanced cooling components. It comprises a combined pump/CPU block and custom single- & dual-radiators with integrated reservoir. It allows the integration of two graphics cards into the cooling loop. Our radiators are custom made by Swiftech and designed to fit the LEET™ chassis. Changes include repositioned tube connections and reservoir. Technical specifications for all Liquid Cooling Parts can be found on www.swiftech.com The following components are required for our LEET HTPC custom liquid cooling setup: - Swiftech Apogee Drive II CPU Waterblock with integrated Pump - LEET™ Custom Single 12x12 cm Radiator - LEET™ Custom Dual 12x24cm Radiator with integrated Reservoir - GPU Water block(s) of your choice (we recommend Swiftech, EVGA, Koolance, and EK due to the position of the in-/and outlet ports) - 8x 1/2"-3/4" Compression Fitting - 3x 90 Degree Swivel Elbow Adapter - 1x G1/4" Plug - Only when running two graphics cards in the loop: additional GPU waterblock and 2x Male-Male SLI & CrossFireX Connector Fittings or bridge - 1/2"-3/4 Tubing Swiftech 1/2-3/4 Lok-Seal Compression Fitting - Black $8.00 Swiftech 90 Degree Swivel Elbow Lok-Seal Adapter - Black $9.00 SD Custom Silicone Gasket/Decoupler Set to Eliminate Fan Vibrations (2 x 12x24 cm & 2x 12x12 cm) $19.00 LEET™ Custom Single 12x12 cm Radiator (based on Swiftech MCR120-QP Rev2) $49.00 LEET Custom Dual 12x24 cm Radiator with integr. Reservoir (based on Swiftech MCR220-QP Rev2) $69.00 Swiftech Apogee Drive II CPU Waterblock with integrated Pump for Intel Socket 1155 and 1366 $145.00 Swiftech Apogee Drive II CPU Waterblock with integrated Pump for Intel Socket 2011 $136.00 Swiftech Apogee Drive II CPU Waterblock with integrated Pump for all AMD Desktop Sockets $139.00 Swiftech 1/2-3/4 Lok-Seal Compression Fitting - Chrome $8.00 Swiftech 90 Degree Swivel Elbow Lok-Seal Adapter - Chrome $9.00 Swiftech Male-Male Lok-Seal SLI & CFX Connector Fitting Adjustable from 11 to 18mm - Black $6.00 Swiftech Male-Male Lok-Seal SLI & CFX Connector Fitting Adjustable from 11 to 18mm - Chrome $6.00 Swiftech Plug - Black $2.00 Swiftech Plug - Chrome $2.00 Couchmaster Lapdesk The COUCHMASTER is an innovative, European-handmade lapdesk for mouse and keyboard, bringing the desktop PC experience to your living room. It is the perfect support equipment for long comfortable gaming sessions and for ergonomic working on your living room TV. Two large faux leather covered support cushions carry your forearms optimally while the crossboard holds all mice, keyboards, and accessories. The Pro version comes with USB extension cord and integrated USB 3.0 hub which provides connections for up to 4 USB devices (e.g. mouse, keyboard, headset, USB charger, etc.). Latest chip and cable technology makes it possible to operate the hub and devices without a dedicated power cable. COUCHMASTER Basic includes the following parts and accessories: - Sturdy, lightweight faux leather covered wooden crossboard (34x12x1.5 in or 85x30x4 cm) - 2 faux leather covered side support sushions (24x10x7 in or 60x25x18 cm) - 2 wrist pads, faux leather - 8 ft of Velcro to affix wrist pads and gaming equipment to the crossboard COUCHMASTER Pro includes the following parts and accessories: - Sturdy, lightweight plastic crossboard with integrated cable management solutions (34x12x1.5 in or 85x30x4 cm) - 2 faux leather covered side support sushions (24x10x7 in or 60x25x18 cm) - 3 wrist pads, faux leather - 8 ft of Velcro to affix wrist pads and gaming equipment to the crossboard - USB 3.0 Hub with 4 Ports (max 900 mA, no dedicated power cable required) - 16 ft (5 m) Active USB 3.0 Extension Cable (black) Price is including shipping cost. Out of Stock - back in March - COUCHMASTER Basic - Designed for wireless devices. Faux leather crossboard, support cushions, and wrist pads Out of Stock - back in March - COUCHMASTER Pro black - 4-port USB 3.0 Hub, 16 ft extension cable, plastic crossboard with cable management, faux leather support cushions and wrist pads. None Mouse & Keyboard There are multiple ways to control your STEIGER DYNAMICS Home Theater PC. There is a wide variation of Smartphone and Tablet Remote Control Apps like Splashtop or Microsoft Remote Control. Please contact us for further info.For Media Center and regular PC usage, we recommend the Logitech TK820 Keyboard/Touchpad combo.For serious gaming or working from the couch, we recommend wired or wireless Mouse & Keyboard with a hard mousepad, either directly from the sofa and lap or with the COUCHMASTER above. ROCCAT mice and keyboards are extremely precise and perfectly suited for gaming and work. For wireless operation, we highly recommend the Logitech devices listed below. ROCCAT Kone Pure - Core Performance Gaming Mouse ROCCAT Kone XTD - Max Customization Gaming Mouse Logitech G700s - Wireless Gaming Mouse ROCCAT Hiro - 3D Supremacy Surface Gaming Mousepad - Soft, Black, Vulcanized Silicone ROCCAT Alumic - Double-Sided Gaming Mousepad - Hard & Solid, Black, Coated Aluminum Geared Titan - Precision Tracking Mousepad - Hard & Solid, Black, Brushed Aluminum ROCCAT Isku - Illuminated Gaming Keyboard Logitech K800 Wireless Illuminated Keyboard Logitech K830 Wireless Illuminated Keyboard with Touchpad None Other Peripherals The LEET chassis comes preinstalled with an IR iMON receiver and remote control. Remote: STEIGER DYNAMICS Windows Media Center Remote Control $0.00 Gamepad: Microsoft XBOX 360 Wireless Controller(s) for Windows - Black [SD Recommended] $59.00 Gamepad Battery: Rechargeable Battery Pack for 2 XBOX 360 Controllers - Black $29.00 Gamepad Charger: KONNET Charging Dock for 4 XBOX 360 Controllers - Black $49.00 Accessories Every LEET comes with a list of complimentary accessories to ensure plug & play experience and to keep all included spare parts and documents in one place. The STEIGER DYNAMICS Engineer Signature Badge carries the signature of the engineer who built your system and who will be your primary contact should you ever require support with your system. STEIGER DYNAMICS Black Cloth Binder with Manuals, Software, and Accessories $0.00 STEIGER DYNAMICS Box with Spare Parts/Screws/Cables $0.00 Active USB 3.0 Extension Cable - 16 ft (5 m) (Black) $35.00 Warranty & Support All components built into our systems are of highest quality and go through rigorous quality control before they are installed. We are convinced that a no-compromise product like the LEET deserves only the very best product support. This means: - Every chassis is complemented with a 1 year limited warranty 1 Year Part Replacement and Customer Care $0.00 Total Special Instructions - e.g. drive partitioning, settings, tweaks, special hardware requests, and/or other comments: You have 1000 characters left. Do not use HTML. Please enter your Discount or Gift Certificate Code (if any): Continue Chassis Subtotal ~ Ship Date Add to Cart Save Config Print Config Have Questions?Call 1-855-915-9000 Live Chat Email Us
Chassis